WASTE OIL HEATER Multi-Fuel - Commercial - 120,000 BTU - 15 Gallons - 115 Volts

Description

Free Shipping
within the
Lower 48 United States
. If you are located outside of the Lower 48 United States, please request a freight quote.
Model Number:
PTAENH001
Condition:
New
Description:
WASTE OIL HEATER Multi-Fuel - Commercial - 120,000 BTU - 15 Gallons - 115 Volts
Features:
120,000 BTU - 15 Gallon Capacity - Burn Used or New Motor Oil, Vegetable Oil, Used or New Transmission Fluid, Used or New Hydraulic Fluid and Kerosene in this Heater - 6" Flue - EPA Approved.
THIS LINE OF COMMERCIAL EXHAUST FANS IS AVAILABLE IN FOLLOWING CONFIGURATIONS:
Sizes range between 24" to 48"
Motors from 1/3 to 2 Hp
Single Phase or 3 Phase
CFM Ranges from 3,270 to 25,455
Please Note:
These units are built to order. Please allow 5 to 8 Business Days for manufacturing and shipping
Description & Specification:
Commercial Heavy Duty 120,000 BTU Waste Oil and Multi-Fuel Heater - EPA Approved
Designed for Commercial Applications - Ideal for commercial garages, fleet maintenance facilities and other commercial facilities.  Easy to maintain and operate
Burn the Following Oils & Fluids in this Heater:
Used or New Motor Oil, Vegetable Oil - Used or New Transmission Fluid, Used or New Hydraulic Fluid and Kerosene
Generates 120,000 BTU of clean affordable heat
Fuel Tank Capacity: 15 Gallons
Consumption Rate: 4/5 of a gallon of waste or new oil or fluid per hour
Feed Method: Drip
Power Source: 115V electric
Ignition Type: Manual
Fuel Pump Motor: 3.8 Amp
Exhaust Pipe Required: 6"
Connects directly to your existing 6" exhaust piping
Flue Size: 6"
Thermostat: Remote
Exhaust Type: Updraft
Fan: 16" Circulating - 115V
Exterior Material: Powder Coated Steel
Heating Chamber Material: 12 Gauge Steel
Cleaning & Inspection: Performed through easy-access fire box
Filtering: Spin-on filter (similar to an automotive oil filter)
This heater is fully enclosed to reduce noise
Control box has integrated circuit board and indicator lights
EPA approved for use in all states in the USA
UL - Conforms to UL Standards
CUL/CSA - Conforms to CUL/CSA Standards
Optional:
Model PT221551
- Waste Oil Collection and Holding Tank - Eliminates awkward drain pans and reduces spills. 14 gauge steel tank has pneumatic spoked wheels, steerable front caster and a long handle for easy transport. Low profile slips under any car or truck. Removable metal screen for draining filters. V-bottom tank slopes and has a 3/4" clean-out hole for easy drainage. Uses any standard furnace filter to capture larger non-burning particles.  (Please Inquire)
Optional:
Model PTBAE0209
- Heater Stand - Raises your heater 12" off the ground - provides easier access for fulling, cleaning and maintenance (please inquire)
Overall Dimensions: 23" W x 30" L x 42" H
Please allow 2 weeks for delivery - we build this heater to order
Ship weight: 250 Lbs
5 Year Manufacturer's Warranty on Heat Chamber (Includes Parts & Labor)
1 Year Manufacturer's Warranty on Remainder (Includes Parts & Labor)
Returns ARE NOT accepted
for this heater as we built them to order.  Should you heater become inoperable for ANY reason, you will be required to exercise your warranty and call our technical support.  We will not only provide technical support, we will also provide parts as needed at no charge under your warranty
Made in the U.S.A.