WASTE OIL HEATER Multi-Fuel - Coml - Includes Pedestal & Chimney Kit 120,000 BTU

Description

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
___________________________________________________________________________________________________________
Model:
VIRAENH001PEDCK
Condition:
New
Description:
Waste Oil & Multi-Fuel Heater - Commercial
Features:
120,000 BTU - 15 Gallon Reservoir - Burn Used or New Motor Oil, Vegetable Oil, Used or New Transmission Fluid, Used or New Hydraulic Fluid, and Kerosene in this Heater -
Includes 12" Pedestal for Easy Maintenance and Servicing and 6" Through Wall or Through Roof Chimney/Venting Kit
- EPA Approved, Conforms to UL Standards, Conforms to cUL and CSA Standards -
Made in the USA
Payment Options:
We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing through PayPal Credit
Shipping:
Free Shipping within the Lower 48 United States.  We also Ship Worldwide via Air, Ocean and Common Carrier.  Contact us for a Freight Quote
Discounts:
We Offer Multiple Item Purchase Discounts - Please Inquire
______________________________________________________________________________________________________
SEE OUR FULL LINE OF HEATERS AND ACCESSORIES
IN OUR EBAY STORE BY CLICKING THE "VISIT STORE" LINK ABOVE UNDER SELLER INFORMATION
Questions?  Click the "Contact Seller" Link Above (under Seller Information) or Find us on the Web at Streamline Industrial a VirTau Company
Description & Specifications
:
Commercial Heavy Duty 120,000 BTU Waste Oil and Multi-Fuel Heater with 12" Pedestal - EPA Approved
Designed for Commercial Applications - Ideal for commercial garages, fleet maintenance facilities and other commercial facilities.  Easy to maintain and operate
Burn the Following Oils & Fluids in this Heater: Used or New Motor Oil, Vegetable Oil - Used or New Transmission Fluid, Used or New Hydraulic Fluid and Kerosene
Note:
Using our waste oil heater with
Synthetic Oils
.  Synthetic oils can be burned in our heater, but cannot exceed 15% of the total oil being fed into the heater.  Using a greater than 15% mixture of synthetic oils will reduce the quality of the burn and in some cases cause the heater to loose it's flame.  15% or less synthetic oil to 85% or more petroleum based oils and fluids will provide the most effective burn.
NEVER ATTEMPT TO BURN GASOLINE OR OILS THAT ARE MIXED WITH/SATURATED BY GASOLINE OR ANY OTHER EXPLOSIVE AGENTS
Generates 120,000 BTU of clean affordable heat
Fuel Tank Capacity: 15 Gallons
Fuel Consumption Rate: 0.8 Gal/Hr
Feed Method: Drip
Voltage: 115V
Phase: 1
Hertz: 60
Amp Draw: 3.8
Ignition Type: Manual
Exhaust Pipe Required: 6"
Flue Size: 6"
Thermostat: Remote
Exhaust Type: Updraft
Fan: 16" Circulating - 850 CFM
Exterior Material: Powder Coated Steel
Heating Chamber Material: 12 Gauge Steel
Cleaning & Inspection: Performed through easy-access fire box
Filtering: Spin-on filter (similar to an automotive oil filter)
This heater is fully enclosed to reduce noise
Control box has integrated circuit board and indicator lights
Pedestal: 12" Included - Raises Heater 12" from floor for easy maintenance and servicing
Venting/Chimney Kit: Included - Choose either through wall or through roof chimney kit (see chimney/venting kit photos in this listing).
Please specify through wall or through roof chimney kit when ordering
Listings & Approvals: EPA approved for use in all states in the USA, Conforms to UL Standard 296, Conforms to cUL & CSA Standard B140.3
Optional Item:
Model VIR221551
-
Waste Oil Collection and Holding Tank - Eliminates awkward drain pans and reduces spills. 14 gauge steel tank has pneumatic spoked wheels, steerable front caster and a long handle for easy transport. Low profile slips under any car or truck. Removable metal screen for draining filters. V-bottom tank slopes and has a 3/4" clean-out hole for easy drainage. Uses any standard furnace filter to capture larger non-burning particles (please inquire)
Optional Item:
Model VIRT9FB381593
-
Insulated Drum Heater - for 55 Gallon Drums - 120V - 3.3 Amps (please inquire)
Please allow 2 weeks for delivery, we build this heater to order
Overall Dimensions: 23" W x 30" L x 42" H (54" with pedestal)
Ship weight: 450 Lbs
5 Year Warranty on Heat Chamber (Includes Parts & Labor)
1 Year Warranty on Remainder (Includes Parts & Labor)
Returns ARE NOT accepted for this heater as we built this unit to order.  Should you heater become inoperable for ANY reason, you will be required to exercise your warranty and call our technical support.  We will not only provide technical support, we will also provide parts as needed at no charge under your warranty
Made in the
USA