CONDENSING UNIT HEATER Commercial - LP Propane - 93% Efficient - 167,400 BTU

Description

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
________________________________________________________________________________________________________________
Model:
VIR109779P
Condition:
New
Description:
Condensing Unit Heater - Commercial/Industrial
Features:
167,400 BTU - LP Propane Fired - 93% Efficient - Designed Specifically for Corrosive Environments - Vent as Either 2-Pipe or Concentric - Separated Combustion System - ETL Listed, CSA Certified, UL Listed, ANSI Compliant - Made in the USA
Payment Options:
We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing through
Shipping:
We Ship Worldwide via Air, Ocean and Common Carrier.  Contact us for a Freight Quote
______________________________________________________________________________________________________
SEE OUR FULL LINE OF
LP PROPANE HEATERS
BY FOLLOWING THIS LINK:
OUR LP PROPANE HEATER LINE
This series of commercial condensing unit heaters is available in 125,500 BTU to 288,000 BTU output configurations.  Available in both Natural Gas and LP Propane configurations
Questions?  Give our Customer Service Department a Call
Click the "Ask a Question" Link Below
Description & Specifications:
Commercial/Industrial LP Propane Fired Condensing Unit Heater - 167,400 BTU
Our USA made condensing unit heaters are 93% efficient which provides substantial energy savings
Recommedend for corrosive and high moisture environments including greenhouses, barns, poultry houses commercial manufacturing and assembly facilities and similar
What is a condensing heater?  A condensing heater passes hot flue gases through a secondary, stainless steel heat exchanger which recycles the exhaust and draws the heat out
Our condensing unit heaters guard against mold and maintains uniform wall-to-wall temperatures with consistent air circulation
Harmful combustion fumes are vented outdoors
Features a commercial grade stainless steel secondary heat exchanger that is built to withstand acidic condensate
Can be vented as either two pipe or concentric vent system with 3" and 4" PVC vent pipe for quick, flexible and cost effective installation.  This heater is power venting capable
Separated combustion eliminates operating issues caused by negative pressure, dust and moisture
Separated combustion draws fresh air from outdoors
Commercial grade polyester powder coat finish on cabinet
Single stage, direct spark ignition.  100% shut-off with continuous retry.  Utilizes a single-stage combination gas control with ignition control
If your mounting application is over 2,000 Ft above sea level, please let us know before you order and we'll include a high altitude kit at no extra cost
(for more information, please contact us Click the "Ask a Question" Link Below)
Heater Type: Condensing Unit Heater - Commercial/Industrial
Fuel Requirement: Propane (LP)
BTU Rating - Output: 167,400
BTU Rating - Input: 180,000
Motor: PSC Type - 1/3 Hp
Current Rating: Factory Configured at 115V, 1 Phase (can be field reconfigured by your electrician to 208V, 230V, 460V or 575V, 1 or 3 phase through built-in Control Step Down Transformer)
Motor Amps: 4.6
Total Amps: 6.9
Hertz: 60
Phase: 1
Ignition: Direct spark
Safety Controls: 100% gas shut off safety control
Condensate Production (Gal/Hr): 1.3
Outlet Velocity (FPM): 676
Air Temperature Rise: 51ºF
Maximum Mounting Height: 15 Ft
Heat Throw at Maximum Mounting Height: 53 Ft
Clearance to Combustibles - Side Access Door: 6"
Clearance to Combustibles - Side: 6"
Clearance to Combustibles - Top: 6"
Clearance to Combustibles - Bottom: 6"
Clearance to Combustibles - Rear: 18"
Clearance to Combustibles - Vent Connector: 6"
Combustion Air Inlet: 4" PVC
Flue Exhaust Outlet: 4" PVC
Mounting: Horizontal
Fan Diameter: 22"
Construction: Steel
Thermal Efficiency Rating: 93%
Mounting: all units in this series have four mounting holes and can be mounted with 3/8-16 threaded rods
Definitions of Rear View
(see rear view photo in this listing): 1) power exhauster; 2) pressure switch; 3) control step down transformer; 4) integrated direct spark control board; 5) flame sensor; 6) single stage gas valve; 7) flame roll out switch; 8) direct spark ignitor; 9) high limit switches; 10) condensate drain overflow switch; 11) gas pipe connection; 12) condensate drain connection; 13) combustion air inlet pipe connection; 14) vent pipe connection; 15) fan guard; 16) contractor convenience package; 17) horizontal air deflector blades
Optional thermostat available - see Optional Item below
Certifications & Approvals: CSA Design Certified - UL Listed - ANSI Z83.20 Compliant.  All models in this series of condensing heaters are approved for use in California by the CEC and in Massachusetts.  This line of heaters is certified for residential and commercial/industrial applications
Optional Item:
Model VIRCR2095
- Thermostat - Dial Type - 120/240V - NEMA 4 - Can be used with 24V systems
-
Please inquire:
Overall Dimensions: 42.53" L x 33.83" W x 25.81" H
Please allow 2 weeks for delivery - this heater is built to order
Weight: 215 Lbs
10 Year Warranty - Heat Exchanger (Includes Parts & Labor)
2 Year Warranty - Remainder of Unit (Includes Parts & Labor)
Made in the U.S.A.
*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
Track Page Views With
Auctiva's FREE Counter