10' FT Restaurant Commercial Kitchen MakeUp Air Hood CaptiveAire Complete SYSTEM

Description

10' FT UL Restaurant Commercial Kitchen MakeUp Air Hood CaptiveAire SYSTEM. Condition is New. “Brand New”
10' Restaurant Hood System w/ Make-Up Air ,Exhaust Fan & Curbs
Price ,500
Brand New Captiveair
Commercial HOOD Type 1
Never use ready to pick up
If you are interesting contact directly show contact info
The price is negotiable
Details :
1 ea CAPTIVEAIRE
Hood #1
5424ND‐2 ‐ 10ft 0" Long Exhaust‐Only Wall Canopy Hood with Built‐in
3" Back Standoff x1
‐ 430 SS Where Exposed x1
‐ Fire Cabinet on the Right Side 12.00" Width x 54" Length x 24.00"
Height (Additional charges may apply for
cabinet if not sold with fire system)
x1
‐ FILTER ‐ 20" tall x 16" ( 19.625" by 15.625") wide Stainless Steel
Captrate Solo filter with hook, ETL Listed.
Particulate capture efficiency: 85% efficient at 9 microns, 76% efficient
at 5 microns. Used on hoods shipped
AFTER 7/27/17.
x7
‐ L55 Series E26 Canopy Light Fixture ‐ High Temp Assembly, Includes
Clear Thermal and Shock Resistant Globe
(L55 Fixture), Bulbs By Others
x3
‐ EXHAUST RISER ‐ Field Cut 16" Diameter X 4" Height x1
‐ 1/2 Pint Grease Cup New Style, Flanged Slotted x2
‐ FIELD WRAPPER 16.00" High Front, Left, Right x1
‐ Electrical Package Installation in Utility Cabinet by Plant. x1
‐ BACKSPLASH 80.00" High X 132.00" Long 430 SS Vertical (Includes End
Caps & Divider Bars) x1
Fire System #1 ‐
ANSUL‐3.0/3.0‐MANIFOLD Ansul 6 gallon Manifolded Fire System in
Utility Cabinet (includes pre‐piped hood(s)
with detection, tank(s), release mechanism, microswitches and pull
Sell
Item Qty Description Sell Sell Total
station).
Includes piping for hood: 1.
x1
‐ ANSUL FIRE SUPRESSION SYSTEM HOOK‐UP INCLUDES: ‐ Parts. ‐ Final
Hook‐up, Test(s), Permit and providing
(1) Mechanical Gas Valve up to 2” per system. EXCLUDES: ‐ Hanging
remote utility cabinet (If not mounted on left
or right side of hood). ‐ Connecting to building fire alarm
panel/system. ‐ Providing connecting fire alarm
audio/visual devices. ‐ All union labor & prevailing wages. ‐ K‐Class
Fire Extinguisher. ***NOTE*** Cooking
equipment must be verified prior to order release. Any changes to
equipment type, size, or sequence will require
a new quote. Any changes made to cooking equipment once order is
released will require a field change order
to execute at an additional charge.
Fan #1 EABDU18 ‐ Exhaust Fan
EABDU18 Belt Drive Centrifugal Upblast Exhaust Fan with 18.75" wheel
Exhaust Fan handles 2500 CFM @ ‐1.125" wc ESP, Fan runs at 1066 RPM.
Exhaust Motor: 1.500 HP, 1 Phs, 115 V, 60Hz, 13.6 FLA, ODP (Open Drip
Proof)
x1
‐ Grease Cup for kitchen‐duty centrifugal exhaust fans, Box
Dimensions 17‐1/8 L X 5‐1/16 W X 3‐3/4 H (18 GA.)
(Includes Down Spout)
x1
Gasketing Thermeez Woven Ceramic Tape 1/4" x 1" with adhesive
back Max Temp 1500°F. To be applied
between fan base and grease duct. Installed under fan base 1/2" from
the inside edge of the base to match up
with the curb top flanges.
x1
‐ Curb CRB26.5x20E On Fan #1 Flat Curb x1
‐ Hinged Base for Curb. Standard Hinge attached to curb. Used on Fans
with wheels 20 inches or smaller. 12
GA Galvanized.
x1
‐ Vented Base for Curb
Electrical System #1
SC‐11111002 120V 1 Phase w/ control for 1 Exhaust Fan, 1 Supply Fan,
Exhaust on in Fire, Lights out in Fire. x1
‐ Digital Prewire Lighting Relay Kit. Includes hood lighting relay &
terminal blocks. Allows for up to 1400W of
lighting each.
Custom
Duct Run #1
(P1) DW16FRISER Single Wall Duct Riser With Retaining Rings, 16" Duct,
Used on Field Installations. Includes 1/4‐
20 Hardware (8) Nuts (8) Bolts ‐ (1) Single Bottom Ring (2) Top Rings 2
Pieces Per Assembly.
x1
(P2) DW1647DWLT‐2R‐S Double Wall Duct ‐ 16" Inner Duct, 47" long ‐ 2
Layers Reduced Clearance ‐ 20"
Stainless Steel Outer Shell.
x1
(P3) DW1647DWLT‐2R‐S Double Wall Duct ‐ 16" Inner Duct, 47" long ‐ 2
Layers Reduced Clearance ‐ 20"
Stainless Steel Outer Shell.
x1
(P4) DW1647DWAJD‐2R‐S Double Wall Adjustable Duct ‐ 16" Inner
Duct, 47" long ‐ 2 Layers Reduced Clearance
‐ 20" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5"
/ Adjustment = 30.5" / Adjustable Section
May Need To Be Cut. Includes single and double wall "V" Clamps.
x1
(P5) DW164550DWLTTP‐2R‐S Double Wall Duct ‐ 16" Inner Duct, 45.5"
long ‐ 2 Layers Reduced Clearance ‐ 20"
Stainless Steel Outer Shell ‐ Used With Transition Plate.
x1
(P6) DW2616TPDBEX Duct to Curb Transition 3/4" Down Turn, 26.5"
Curb to 16" Duct, 16 GA Aluminized. Used
on NCA16FA / NCA16HPFA & NCA18FA / NCA18HPFA. Transition Plate
OD is 27.00" Designed For Use With
Exhaust Fan. Non‐Standard Part.
x1
3M‐2000PLUS Duct ‐ 3M Fire Barrier 2000 Plus Silicone ‐ Used as sealant
to Seal Duct Joints. x2
DW16DWCLASY‐2R‐S Duct ‐ 16" Duct ‐ 20" Double "V" Clamp ‐ 2R
Insulation & Single "V" Clamp Included ‐
Reduced Clearance.
x1
Item Qty Description Sell Sell Total
Acceptance: Date:
Printed Name:
DW20DWRISER‐2R‐S Double Wall Riser Cover ‐ Used On 16" Inner
Riser, 4" long ‐ 2 Layers Reduced Clearance
‐ 20" Stainless Steel Outer Riser Shell Assembly. Includes Insulation &
Single V Clamps For Inner & Outer
Connections.
Supply Fan
Phoenix FD450 (Evaporative Cooler) Down Discharge
Supply Fan Handles 26803072 CFM @ 0.500” wc ESP
Supply Motor: 0.500 HP, 1 Phase 115 V
Includes: motor, pump and float.